Drip Irrigation Pipes
WATER IS ONE OF THE MOST ESSENTIAL ELEMENTS THAT SUPPORT LIFE ON EARTH. HOWEVER, IF IT IS NOT MANAGED PROPERLY, THIS VALUABLE RESOURCE COULD BE WASTED
That is why the Trade and Development Group Company takes up the initiative of bringing a various range of effective and innovative irrigation systems to the farming, landscaping, and water supply
Twin Drip UNILITE Integral Thin Wall Drip Line
Tape integral drip-line for drip irrigation systems with two drip holes flat-shaped emitters fused to the inner tube wall.
- TWIN UNILITE is clog-resistant due to the unique flow path structure design.
- TWIN UNILITE drip line tape grants an easy layout and retrieval.
- TWIN UNILITE has a low CV ≤ of 5%.
- TWIN UNILITE is manufactured in a wide range of different wall thicknesses.
- TWIN UNILITE is manufactured from durable materials resistant to fertilizers commonly used in irrigation.
Flow rates for wall thickness of 8 mils, 4.0 lph at 0.8 bar. Flow rates vary according to the wall thickness and inlet pressures.
Application
Cost-effective solution for all kinds of field crops, vegetables, greenhouses, nurseries, and fruit orchards. TWIN UNILITE can be used for surface and subsurface irrigation systems.
Diameter and Wall Thickness
Nominal outside diameters are 12, 16, 17, mm & 22 mm. Wall thickness, 7, 8, 10, 12, 15, 18, 20, 24, & 28 mil.
Flow Rate
The flow rate slightly varies according to wall thickness. The maximum operating pressure varies according to wall thickness. The flow rate for wall thickness of 8 mils is 4 at 0.8 bar.
Flat Drip Pipe (UNILITE Tape)
Flat integral drip-line for drip irrigation systems with flat-shaped emitters fused to the inner tube wall. UNILITE is clog-resistant due to the unique flow path structure design. UNILITE drip line tape grants an easy layout and retrieval. UNILITE has a low CV, ≤ 5%. UNILITE is manufactured in a wide range of different wall thicknesses. UNILITE is manufactured from durable materials resistant to fertilizers commonly used in irrigation. Flow rates for wall thickness of 8 mils 1.75, 2.4 & 3.1 lph at 0.8 bar. Flow rates vary according to the wall thickness and inlet pressures.
Application
Cost-effective solution for all kinds of field crops, vegetables, greenhouses, nurseries, and fruit orchards. UNILITE can be used for surface and subsurface irrigation systems.
Diameter and Wall Thickness
Nominal outside Diameters are 12, 16, 17 mm & 22 mm. Wall Thickness, 7, 8, 10, 12, 15, 18, 20, 24 & 28 mil.
Flow Rate
The flow rate slightly varies according to wall thickness. The maximum operating pressure varies according to wall thickness. Flow rates for wall thickness of 8 mils are 1.4, 1.5, 2.2, 3.9, 4.0 & 4.3 l/h, at 0.8 bar.
UNI-PC Integral Thick Wall Pressure Compensating Drip Line
Since drip irrigation systems operate at relatively low pressures, even small variations in pressure can have a significant effect on how uniformly the system applies water to the crop. For this reason, pressure compensating drip pipes are often used, especially on fields where the elevation varies considerably, or when long-running distances of drip pipes laterals are needed. UNILITE has a low CV, ≤ 5%. UNILITE is manufactured in a wide range of different wall thicknesses. UNILITE is manufactured from durable materials resistant to fertilizers commonly used in irrigation. Flow rates for wall thickness of 8 mils 1.75, 2.4 & 3.1 lph at 0.8 bar. Flow rates vary according to the wall thickness and inlet pressures.
- UNI-PC is clogging resistant due to the unique flow path structure design
- UNI-PC drip line grants an easy layout. UNI-PC has a low CV, ≤ 1.25%
- UNI-PC is manufactured from durable materials resistant to fertilizers commonly used in irrigation.
- UNI-PC Flow rates for wall thickness of 1.0 mm are 2 & 4.5 lph at 1.0 bar for OD 16 mm pipes.
- UNI-PC has a constant discharge over a pressure range of 1.0 – 3.5 bars.
- UNI-PC is a cost-effective way to irrigate crops in difficult topographical conditions, low and varying water pressures, and where longer laterals are required.
- UNI-PC can be produced in one, dual or more water outlets holes & from both outlet sides of the dripper.
Application
Cost-effective solution for all kinds of field row crops, vegetables, greenhouses, nurseries, and fruit orchards. UNI-PC can be used in surface and subsurface irrigation systems.
Diameter and Wall Thickness
Nominal outside Diameters is 16 mm. Wall Thickness, 0.7, 0.8, 0.9, 1.0 & 1.1 mm.
Flow Rate
Flow rates for wall thickness of 1.0 mm are 2.0 & 4.5 l/h, @ 1.0 bar, for OD 16 mm pipe.
Round Drip Pipes (UNIGREEN)
Round integral drip-line for drip irrigation systems with cylindrical-shaped drippers, fused to the inner pipe wall.
- UNIGREEN is clog-resistant due to the unique flow path structure design.
- UNIGREEN drip line grants an easy layout.
- UNIGREEN has a low CV, ≤ 5%.
- UNIGREEN is manufactured in a range of different wall thicknesses.
- UNIGREEN is manufactured from durable materials resistant to fertilizers commonly used in irrigation.
